时控开关的定时设置步骤如下：

　　The timing setting steps of the time control switch are as follows:

　　1、 按[定时]键 进入第1组定时开的设定(显示1开);

　　1, press the timing button to enter the first set timing setting (display 1 open).

　　2 、分别按[星期]、[时]、[分]键 设定开启的时间(星期、时、分);

　　2, set the opening time (week, hour, minute) according to the key of [week], [time], and [divide] respectively.

　　3 、再按[定时]键 进入第1组定时关的设定(显示1关);

　　3. Press the timer button to enter the first set timing setting (showing 1 passes).

　　4 、分别按[星期]、[时]、[分]键 设定关的时间(星期、时、分);

　　4. Set the time (weeks, hours, minutes) separately according to the time of [week], [time], and [key].

　　5 、重复“1、2、3、4”步骤 可设定2-10组开关的时间;

　　5, repeat the steps of "1, 2, 3, 4" to set 2-10 groups of switches.

　　6、 连续按[定时]键 检查各组开关时间和星期是否与要求的一样，如不正确，还应重复步骤2、4;

　　6. Check the switch time and whether the week is the same as required by continuous time key. If incorrect, repeat steps 2 and 4 should be repeated.

　　7 、按[自动/手动]键 将开关符合(“ ▼ ”)调到当前时间所处的状态(“开”或“关”)再调回到“自动”位置;

　　7. Switch the switch conforming to the current state ("open" or "turn") back to the "automatic" position according to the [automatic / manual] key.

　　8 、按[时钟]键 结束时间设定进入时钟显示状态。

　　8, press the "clock" key end time to enter the clock display status.

产品关键词：